00:09 mako132_ joined 00:10 justatheory joined
rbysamppi Can you method-call a multisub? multi f (Int $x: Int $z) { ... }; f 2: 3 00:30
audreyt yes, but that's a fallback 00:33
if method dispatch fails
it pretends you did
f(2, 3)
i.e. if 2.f() can't be found
Arathorn hum 00:34
prelude compiling seems to be broken - on the range operator
in push @rv, (~ $start)..(~ $end);
(line 412 of src/perl6/Prelude.pm) 00:35
Arathorn investigates as best he can
00:41 macroron__ joined 00:45 dvorak joined
Arathorn whee, this is rather fun 00:49
losing the char '.' >> notFollowedBy (char '.') in #10167 is the kicker... 00:50
01:09 hexmode joined 01:13 FurnaceBoy_ joined
Arathorn bah, i don't understand parsec well enough 01:17
(assuming this is parsec)
aufrank Arathorn++ just for chasing it down :) 01:38
01:44 ruporama joined 01:47 oylenshpeegul left 01:48 dvorak joined 01:52 schneiker joined 01:53 weinig|away is now known as weinig|sleep
Arathorn Arathorn-- for not having a clue what he's doing, though 01:56
Arathorn defers in favour of playing with Judy, which has the advantage of being written in a language i speak :) 01:57
aufrank have you looked at the "Build a Scheme in 48 hours" tutorial?
it has a good parsec crash course
Arathorn Arathorn will - although tomorrow, at this rate 01:58
02:03 dvorak joined 02:05 Khisanth joined 02:11 ruporama left 02:28 shachaf joined 02:35 Arathorn is now known as Arasleeps
schneiker I'd like to help with Perl6, but don't have much spare time. 02:41
In the course of searching for scattered Perl6 info,
I thought about starting a "perl.perl6.using"
group on Google Groups, with the following focus:
"Information exchange for using Perl 6.
The most useful info and resource links are added to a
weekly-updated "Using Perl 6 FAQ" posting. Topics include:
getting started with Perl 6, incremental migration from Perl 5,
developing Perl 6 tools, what early adapters are doing, etc.
Apparently I cannot do this directly through Google Groups.
I get this error message: "This group name is not suitable.
You cannot start a group name to be similar to a Usenet group."
However my newserver doesn’t show "perl.perl6.*" as part of
the Usenet newsgroup hierarchy (versus just in nttp.perl.org)
My search efforts haven't turned up any helpful info.
Information, feedback welcome.
02:49 sanxiyn joined
FurnaceBoy_ 'similar' though 02:49
who knows what their actual rules are. Try not using a '.'
just "Perl6 Users"
should be okay?
sanxiyn Interesting to see Pugs relicensing. I use this license myself: 02:50
FurnaceBoy_ a.k.a. BSD
FurnaceBoy_ is only joking
you could just say public domain
sanxiyn FurnaceBoy_: It's more fun this way. 02:51
FurnaceBoy_ more swearing involved, if that's your thing
sanxiyn Official homepage of WTFPL is here: sam.zoy.org/wtfpl/
FurnaceBoy_ I came across this one recently:
* ---------------------------------------------------------------------------- 02:52
* "THE BEER-WARE LICENSE" (Revision 42):
* [email@hidden.address] wrote this file. As long as you retain this notice you
* can do whatever you want with this stuff. If we meet some day, and you think
* this stuff is worth it, you can buy me a beer in return. Poul-Henning Kamp
* ----------------------------------------------------------------------------
schneiker "Perl6 Users" should be OK, but I'd like to see it grouped with other "perl.perl6.*"
FurnaceBoy_ impossible schneiker.
you could, however, propose an addition to Usenet.
that would be about 100x more difficult however.
Usenet is a tree owned by root and not world writable;-)
and I think the rules are there to prevent exactly what you propose 02:53
if you want to augment Usenet, go through that procedure, but it will take longer
sanxiyn FurnaceBoy_: alt.* hierarchy is easier to get in.
FurnaceBoy_ true.
but that wouldn't have the ring of officiality that schneiker seems to be pursuing. 02:54
sanxiyn FurnaceBoy_: Big 8 needs voting.
FurnaceBoy_ FurnaceBoy_ notes 'officiality' isn't a word. sorry.
yes, I know.
depends on whether he wants quick'n'easy, or Usenet :)
sanxiyn One can read www.eyrie.org/~eagle/faqs/big-eight.html and start the process. 02:55
schneiker I got Usenet to add comp.lang.ruby, years ago, but it took several months.
However perl.perl6.* does not appear to be part of actual Usenet hierarchy.
That's why I was puzzled.
FurnaceBoy_ whatever way you cut it, a random Google Group is easier. which is why there are a zillion of them.
sanxiyn File RFD to news.announce.newsgroups...
FurnaceBoy_ find its owners schneiker
but I warn you, this way will take work and commitment
compared to opening a random GG 02:56
the result may be worth it ...
are there no perl6 groups in perl.* ?
FurnaceBoy_ goes looking
sanxiyn I still prefer Yahoo! Groups to Google Groups actually.
FurnaceBoy_ FurnaceBoy_ only uses Usenet
sanxiyn FurnaceBoy_: I also use Gmane. 02:57
FurnaceBoy_ ck
worst web interface ever.
sanxiyn FurnaceBoy_: Well, it has NNTP too.
FurnaceBoy_ FurnaceBoy_ thanks Allah
I can;t believe nobody has called them on it
in all these years
maybe all the sane people just use NNTP
02:58 Quell joined
sanxiyn FurnaceBoy_: I only use search.gmane.org from the web interface. 02:58
FurnaceBoy_ schneiker, yeah, there seems an opening for a 'general' group under perl.perl6.*
sanxiyn (Which I found to work better than Google for some cases.)
FurnaceBoy_ you could probably find a way to propose one.
aufrank I'm pretty sure Larry mentioned something about being to able to help in getting that process off the ground 02:59
FurnaceBoy_ perl.perl6.using doesn't seem to have any precedent though... I mean 'using'
there must be a better word
aufrank but I could be imagining things
FurnaceBoy_ yes, TimToady could surely help
if anyone can
schneiker, pounce on TimToady about this
but I suggest a better word than 'using'
general has precedents in Usenet
schneiker FurnaceBoy: OK. I like general better. 03:01
FurnaceBoy: Recommended means to "pounce on TimToady about this"? 03:05
(I'm brand new to IRC, although I have been skimming logs for a while.)
03:07 hcarty joined 03:08 hcarty left
FurnaceBoy_ schneiker, you can ping him now, if he's asleep, wait till he's around here. ? 03:09
schneiker Thanks. 03:16
aufrank ok, I'm off for the night now too 03:23
bye all
03:23 q[uri] joined 03:35 wilx`` joined 03:54 coumbes joined
spinclad Arathorn: i've been pondering looking under the hood of JudyHS, seeing as it's described as implemented through Judy1 and JudyL 04:34
it seems the author doesn't see a natural or useful (or stable?) order to the keys, so doesn't provide iterators 04:36
but if one needs to iterate, in an arbitrary order, a hash order should work 04:38
so perhaps we may have something to contribute back to him...
otoh, Judy1 + JudyHS may be all we need, i haven't seen through this to the other side yet 04:40
04:51 H5N1 joined 04:58 innit joined, innit left 05:20 gaal joined 06:08 iblechbot joined 06:33 cmarcelo joined 06:54 Aankhen`` joined 06:59 ko1_away is now known as ko1 07:10 ko1 is now known as ko1_away 07:36 q[uri]_ joined 07:50 xinming joined 08:12 elmex joined 08:22 chris2 joined 08:30 FurnaceBoy_ joined, bernhard joined, larsen joined
svnbot6 r10170 | audreyt++ | * Massive parsing cleanup. 08:33
r10170 | audreyt++ | * Newly implemented parses:
r10170 | audreyt++ | @<foo> @123
r10170 | audreyt++ | %<foo> %123
r10170 | audreyt++ | map {...}, 1, 2, 3
r10170 | audreyt++ | map {...} 1, 2, 3 # is this form still kosher?
r10170 | audreyt++ | "$var\ .moose()"
r10170 | audreyt++ | * Fixed parsefails:
r10170 | audreyt++ | 1..2
r10170 | audreyt++ | "$var."
r10170 | audreyt++ | "$var.moose"
r10170 | audreyt++ | rule foo { ... \{ ... }
gaal what's @<foo> @123 ? 08:35
audreyt short for @($<foo>) @($123)
gaal what's that mean? 08:37
I got as far as @($<foo>)
audreyt @($<foo>) means @($/.{'foo'}) 08:38
@($123) means @($/.[123])
i.e. the 123rd capture
gaal okay, so what do the two mean juxtaposed? 08:39
audreyt they mean that I was too lazy to type \n 08:40
TimToady: is this form still kosher? 08:41
map {$_+3} 1,2,3,4
gaal thanks :)
audreyt np, sorry :)
TimToady: the only mention is in S03
@result = map { floor($^x / 2) }
grep { /^ \d+ $/ }
if it's not a typo, then it needs to be clearly documented that whitespace-follows-block-literal means comma 08:42
because you've specced that non-comma-follows-block-literal will no longer be arglist
(S12, "it will be considered to be the final argument")
map {moose}.blah # map({moose}).blah 08:43
map {moose} .blah # map({moose}, $_.blah)
map {moose}, .blah # map({moose}, $_.blah)
is the current pugs behaviour
and I wonder how correct it is
but I need to go take a nap. been in $hospital.bureaucracy for an entire day... 08:44
bbiab &
09:07 drbean joined 09:09 dakkar joined
dakkar is it possible that there are still problems re: Cabal and fps? 09:11
here (ghc 6.4.1, Cabal 1.1.3) I can't compile pugs (fresh checkout, svn head) 09:12
build_pugs.pl calls (I think) Setup, who then says «Setup: cannot satisfy dependency fps-any 09:13
Setup: error reading ./.setup-config; run "setup configure" command?»
«ghc-pkg list» shows the fps library...
09:53 KingDiamond joined
Juerd audreyt: I am glad we discussed the long dot on p6l, \. is much better than . . 10:05
theorbtwo It's even somewhat better then .:. 10:06
So it's now \\(<ws>|_)+\. ? 10:07
I'm not sure now if the _ idea was accepted or not.
dakkar am I the only one unable to compile pugs at the moment? (see above) 10:10
10:12 kanru joined 10:20 Arasleeps is now known as Arathorn
Arathorn morning folks 10:20
dakkar Arathorn: what was the error you got while building pugs, yesterday? 10:21
just «can't find Data.ByteString», or «can't read .setup-config»?
Arathorn i had three - the .. parsefail which audreyt corrected in the night, FPS not being handled by Cabal correctly(?) (which audrey fixed at the time), and a "No instance for (Typeable1 Tree)" at src/Pugs/AST/Internals/Instances.hs:138, which i fixed by swiching to ghc 6.4.1 rather than ghc-cvs in debianland 10:24
10:24 cmarcelo left
dakkar yesterday I got «can't find Data.ByteString», today I get «Setup: error reading ./.setup-config; run "setup configure" command?» 10:25
of course there is no .setup-config file...
fixed 10:27
./Setup configure --user
Arathorn you shouldn't need to do that, though... 10:30
10:31 trampel joined
dakkar Arathorn: you tell it ;-) it's compiling now 10:33
Arathorn hehe 10:34
dakkar I just can't figure what I should change in the Makefile.PL to make it work without running Setup manually... 10:35
ok, now that it is compiled, I'll check the parsefails due to whitespace changes and fix the tests 10:38
?eval my $path="abc";$path ~~ s:perl5[^([a-z]:)][{uc$0}];$path; 11:15
11:15 evalbot_10165 is now known as evalbot_10170
evalbot_10170 Error: unexpected end of input expecting block, "\\", "$/", "$!" or ":" 11:15
dakkar parsefail? 11:16
(the code is from File::Spec::Win32)
11:19 coumbes left
dakkar ?eval my $path="abc";$path ~~ s:perl5[^a][A];$path; 11:20
evalbot_10170 Error: No such sub: "&a"
dakkar what?
?eval my $path="abc";$path ~~ s:perl5/^a/A/;$path;
evalbot_10170 \"Abc"
dakkar ?eval my $path="abc";$path ~~ s:perl5 [^a][A];$path; 11:21
evalbot_10170 \"Abc"
dakkar oh, now I get it
11:26 iblechbot joined
dakkar ?eval my $path="abc";$path ~~ s:perl5 [^([a-z]:)][{uc$0}];$path; 11:27
evalbot_10170 Error: unexpected end of input expecting block, "\\", "$/", "$!" or ":"
dakkar ?eval my $path="abc";$path ~~ s:perl5 [^([a-z]:)][{uc $0}];$path;
evalbot_10170 Error: unexpected end of input expecting block, "\\", "$/", "$!" or ":"
dakkar what's going on?
11:36 mako132_ joined
dakkar there's something very wrong in the pugs parser to parse regex... 11:37
clkao dakkar! 11:38
dakkar clkao! 11:39
I'm trying to fix the tests, but I found some strangeness in the rx parser (see above)
did the syntax of 'require' change recently? 11:40
'Junction of Something' does not parse («unexpected "o", expecting comment or variable name») 11:41
I should write down these problems... 11:42
clkao \. is ugly! 11:52
Arathorn just as ugly as .:, imo
especially as the : looked attached to the term it prefixed, rather than part of a longdot 11:53
dakkar this whole whitespace-sensitivity thing doesn't feel very DWIM to me...
audreyt dakkar: fixing
dakkar audreyt: which one?
audreyt s[][] 11:54
s!!! works
as does s////
but s[][] not
a sec
sorry for breaking it
dakkar oh, thanks
Arathorn the white-space sensitivity stuff feels amazingly unDWIM to me too :(
dakkar audreyt: s{}{} has the same problem, btw 11:55
audreyt sure
Arathorn we sacrifice compulsory brackets at the expense of our immortal souls...
11:55 dvorak joined
dakkar is there a more recent smoke table than the one audreyt linked to? 12:03
audreyt yes 12:07
see smoke.pugscode.org
m19s28.vlinux.de/iblech/stuff/pugs-...a4201.html 12:08
dakkar got it 12:09
audreyt s[][] fixed 12:11
12:11 szbalint joined 12:14 kolibrie joined
svnbot6 r10171 | audreyt++ | * Parser: Allow nested begin/end pairs in regex body again: 12:19
r10171 | audreyt++ | rx[ [a-z] ]
r10171 | audreyt++ | however, the parser cannot currently distinguish between:
r10171 | audreyt++ | rx[ \[a-z] # should be valid
r10171 | audreyt++ | rx[ \\[a-z] ] # should be valid as well
r10171 | audreyt++ | as the escape codes are passed thru to the rules engine
r10171 | audreyt++ | without further manipulation. Thinking about how to solve this...
12:21 xerox_ is now known as xerox, r0nny joined
Juerd [mac mini]-- # sometimes refuses to eject, then requires reboot. 12:21
Sometimes being twice in 12 cd's alreday.
Arathorn hope you have enough paperclips handy 12:22
Juerd Arathorn: No such emergency eject thingy.
audreyt: Well, \w characters that are escaped are special to the engine, while \W characters are special to the engine when NOT escaped. 12:23
audreyt: Also, \w characters are no longer valid delimiters
audreyt ah. point.
Juerd But I think there's, ultimately, no other solution than to have the full rule grammar embedded 12:25
'cause there's also rx<"...]...">]
(That was a p5 regex ;))
dakkar pugs's build system is fragile... but I don't know enough to change it... 12:26
«Wasn't able to find 'Syck_stub.o', aborting»
audreyt oh no, not that again 12:27
which ghc version? is Syck_stub anywhere in dist/?
(it's really Cabal 1.0 that is very fragile.)
dakkar ghc 6.4.1, Cabal 1.1.3
audreyt yay, another different point version :/ 12:28
find dist |grep Syck_
dakkar and no, no stub anywhere in sight
audreyt ok. I think I can fix it.
dakkar it's still in src/
audreyt a sec
dakkar should I copy it? 12:29
audreyt well, to get it working, sure
I'll have a better (and saner) fix in a bit
cp the stub to dist/build/src/Data/Yaml/Syck_stub.o
dakkar oops
it's Syck_stub.c, no .o 12:30
audreyt I'm implementing the saner fix (move Data.Yaml.Syck to third-party)
which is good, as it allows D.Y.S. be used separately
dakkar ok, thanks again
audreyt np :) thanks for reporting 12:31
dakkar dakkar is great at finding obscure bugs
audreyt: while you are there, do you have any idea why I have to manually run «./Setup configure --user» to make it find fps? 12:32
audreyt I believe it's a Cabal 1.1.3-specific thing :/ 12:36
12:36 trampel left
audreyt try it again 12:37
dakkar ok, I'll do it by hand
nnunley audreyt: Could it be because the Pugs.cabal file doesn't refer to third-party?
audreyt nope, try 10172
nnunley: no... it's not that 12:38
dakkar: r10172 should fix that
(essentially by adding --user for you)
dakkar ok
I'm fixing a lot of whitespace-related parsefails, btw